Written by Chen Xi, PC & Console Requirements Specialist at Game Launch Hub
Granblue Fantasy: Relink – Endless Ragnarok System Requirements: PC Specs, PS5, PS4 & Switch 2 Performance Guide
Granblue Fantasy: Relink – Endless Ragnarok is the definitive version of Cygames’ action RPG, a massive expansion that adds new story chapters, the summoning battle system, the roguelite Conflux mode, and a suite of new characters including Beatrix, Eustace, Fraux, and Fediel. Performance-wise, this is a mid-weight Unreal Engine 4 title with surprisingly modest GPU demands for its visual fidelity. The official PC minimum asks for a GTX 1060 and 16 GB of RAM, and the game supports resolutions up to 4K with frame rates exceeding 60 fps. It launched on 9 July 2026 for PC, PS5, PS4, and Nintendo Switch 2, with no Xbox version available in any region. The specifications below are taken directly from the official Steam store page, the PlayStation Store listing, and verified outlet reports.
System Requirements
Minimum (Windows, 1080p at 30 FPS, Standard Preset)
| Component | Requirement |
|---|---|
| OS | Windows 11 (64-bit Required) |
| Processor | Intel Core i3-9100 / AMD Ryzen 3 3200G |
| Memory (RAM) | 16 GB |
| Graphics | NVIDIA GeForce GTX 1060 (6 GB) / AMD Radeon RX 580 (8 GB) |
| VRAM | 6 GB on the GTX 1060; 8 GB on the RX 580 |
| DirectX | Version 11 |
| Storage | 90 GB available space, SSD recommended |
| Network | Broadband internet connection required for online co-op |
| Additional Notes | Targets 1080p at 30 FPS with graphics set to Standard. SSD recommended. |
Source: Steam store page for Granblue Fantasy: Relink – Endless Ragnarok and Fanatical. Last verified: 18 September 2026.
What this means in practice: The minimum tier targets 1080p at 30 fps with the Standard graphics preset, as Cygames states directly in the Steam listing. The i3-9100 is a 2019 processor and the GTX 1060 is a 2016 mid-range card, so this is an accessible bar for anyone with a gaming PC built in the last six to seven years. The 16 GB system RAM requirement is non-negotiable and appears at both tiers, which reflects the game’s memory footprint maintaining a consistent floor regardless of graphical settings. The 6 GB VRAM floor on the GTX 1060 is the detail that matters most: the 3 GB variant of the same card will not meet this spec. The 90 GB install size is substantial and reflects the expansion’s new zones, bosses, and the Conflux mode’s procedurally generated dungeon assets. An SSD is recommended but not required, though load times will be noticeably longer on a mechanical drive.
Recommended (Windows, 1080p at 60 FPS, Ultra Preset)
| Component | Requirement |
|---|---|
| OS | Windows 11 (64-bit Required) |
| Processor | Intel Core i7-8700 / AMD Ryzen 5 3600 |
| Memory (RAM) | 16 GB |
| Graphics | NVIDIA GeForce RTX 2080 (8 GB) / AMD Radeon RX 6700 XT (8 GB) |
| VRAM | 8 GB |
| DirectX | Version 11 |
| Storage | 90 GB available space, SSD recommended |
| Network | Broadband internet connection required for online co-op |
| Additional Notes | Targets 1080p at 60 FPS with graphics set to Ultra. SSD recommended. |
Source: Steam store page for Granblue Fantasy: Relink – Endless Ragnarok and Fanatical. Last verified: 18 September 2026.
What this means in practice: The recommended tier targets 1080p at 60 fps with the Ultra graphics preset. The i7-8700 is a 2017 processor and the RTX 2080 is a 2018 upper-mid-range card, so this remains a very achievable target. The jump from 6 GB to 8 GB of VRAM is the most meaningful change between tiers, and it reflects the memory demands of the game’s particle-heavy combat, large boss models, and the Conflux mode’s procedural generation running at Ultra settings. The 16 GB RAM requirement is identical to the minimum, which confirms that the game’s memory footprint does not scale with graphical settings. If you have a gaming PC from the last four to five years with an RTX 2060 or better and 16 GB of RAM, you will meet this tier comfortably.
PlayStation 5
| Component | Requirement |
|---|---|
| Firmware | Latest PS5 system software |
| Storage | 76.14 GB (digital download) |
| Performance (PS5) | Performance: 1080p at 60 fps; Quality: 4K at 30 fps |
| Performance (PS5 Pro) | Performance Pro: 4K at 60 fps (exclusive to PS5 Pro); Quality: 4K at 30 fps |
| Additional Notes | DualSense vibration and trigger effects supported; PS5 Pro enhanced |
Source: PSPrices file size data, PS5 Pro performance data, and 4News review. Last verified: 18 September 2026.
What this means in practice: The PS5 version offers two modes. Performance mode runs at 1080p and 60 fps, while Quality mode pushes 4K at 30 fps. The base PS5 does not support 4K at 60 fps, which was a notable limitation of the original Relink release. The PS5 Pro is the standout: it adds a Performance Pro mode that delivers 4K at 60 fps, which the PS5 Pro’s hardware is uniquely capable of. This is a significant upgrade for players with high-resolution displays. The 76.14 GB download size is substantial, so make sure you have enough free space. If you own a PS5 Pro and a 4K TV, this is the definitive console version.
PlayStation 4
| Component | Requirement |
|---|---|
| Firmware | Latest PS4 system software |
| Storage | 22.89 GB (digital download) |
| Performance | 1080p at 30 fps; no performance mode available |
| Additional Notes | Optimised for PS4; playable on PS5 via backward compatibility |
Source: PSPrices file size data and Nintendo Online’s performance comparison. Last verified: 18 September 2026.
What this means in practice: The PS4 version runs at 1080p and 30 fps with no performance mode option. This is a significant compromise compared to the PS5 version, and it reflects the age of the hardware. The 22.89 GB download size is much smaller than the PS5 version, which suggests the PS4 build uses lower-resolution assets or more aggressive compression. If you own a PS4 and want to play Endless Ragnarok, the game is playable, but the 30 fps cap and lower resolution are noticeable compromises compared to the PS5 version. The game is also playable on PS5 via backward compatibility, though this version will also run at 30 fps rather than taking advantage of the PS5’s extra power.
Nintendo Switch 2
| Component | Requirement |
|---|---|
| Firmware | Latest Nintendo Switch 2 system software |
| Storage | 38.7 GB (digital download) |
| Performance | 1080p at 30 fps in TV and Handheld modes; frame pacing can be uneven |
| Additional Notes | TV, Tabletop, and Handheld modes supported; some visual cutbacks compared to PS5 and PC |
Source: Deku Deals file size data, GameWatcher’s Switch 2 performance analysis, and Eurogamer Germany’s Switch 2 impressions. Last verified: 18 September 2026.
What this means in practice: The Switch 2 version runs at 1080p and 30 fps in both TV and handheld modes, according to GameWatcher’s analysis. The frame rate holds steady 99 percent of the time, and GameWatcher notes that “while it may be disappointing to some, the good news is that, based on my testing during regular exploration and heavy battle scenes, the framerate holds steady.” However, the frame pacing is “a bit wobbly,” and the 30 fps output “could be smoother and less jittery.” Eurogamer Germany’s impressions noted that “the graphics on the Switch 2 have been toned down somewhat and appear slightly washed out in places.” The 38.7 GB download size is much smaller than the PS5 version, which reflects the visual cutbacks. If you own a Switch 2 and want a portable version of Relink, this is a functional but compromised experience.
Steam Deck
| Component | Requirement |
|---|---|
| Compatibility | Playable (Valve’s official rating) |
| Performance | 30 fps target; framerate drops in some cities but remains stable in combat |
| Additional Notes | UI is “gorgeous and easy to read”; no performance issues reported by RPGFan |
Source: Steam Deck HQ’s performance analysis, RPGFan’s review, and NextGame.es analysis. Last verified: 18 September 2026.
What this means in practice: Granblue Fantasy: Relink – Endless Ragnarok carries a Playable rating on Steam Deck. Steam Deck HQ’s testing found that performance is “around the same as before” the expansion, with the frame rate running at 30 fps and drops in some cities that “somewhat blend in with the way combat works.” NextGame.es described their Steam Deck experience as “more than notable,” with “some frame drops in some cities but much more solid in combat against the cursed bosses.” RPGFan’s review noted that the “UI is gorgeous and easy to read and navigate, with the Endless Ragnarok content playing seamlessly on the Steam Deck without any performance issues.” If you own a Steam Deck and enjoy action RPGs, this is a comfortable portable experience with the expected compromises.
macOS and Linux: Not Available
Granblue Fantasy: Relink – Endless Ragnarok is a Windows-only release on PC. There is no macOS or native Linux version available. Steam Deck users play through Proton, and the Playable rating confirms that this compatibility layer works well.
Crossplay and Cross-Save
Endless Ragnarok supports full crossplay across all platforms, allowing players on PC, PS5, PS4, and Nintendo Switch 2 to play together in the game’s four-player online co-op. However, cross-save is not supported across different platform families. The Upgrade Kit, which allows existing Relink owners to carry over their save data, is only compatible with the same platform. Players moving from PS4 to PS5 can carry their save forward, but players moving from PlayStation to PC or Nintendo Switch 2 cannot.
Final Verdict: Can Your Setup Run Granblue Fantasy: Relink – Endless Ragnarok?
Granblue Fantasy: Relink – Endless Ragnarok is an accessible action RPG on PC. The minimum spec asks for a GTX 1060 with 6 GB of VRAM and 16 GB of RAM, which is hardware from 2016-2017. The recommended spec asks for an RTX 2080 with 8 GB of VRAM and 16 GB of RAM, which is achievable on most mid-range gaming PCs from the last four to five years. The 16 GB RAM requirement is the same at both tiers, which tells you the game’s memory footprint does not scale with settings. The 90 GB install size is substantial, so make sure you have enough free space on your SSD. If you have a gaming PC from the last five to six years with a 6 GB GPU and 16 GB of RAM, you can run this game at 1080p and 30 fps on Standard settings.
On console, the PS5 Pro is the definitive version, offering 4K at 60 fps in a Performance Pro mode that is exclusive to Sony’s upgraded hardware. The base PS5 offers 1080p at 60 fps in Performance mode and 4K at 30 fps in Quality mode. The PS4 version is capped at 1080p and 30 fps. The Nintendo Switch 2 version runs at 1080p and 30 fps with some visual cutbacks and uneven frame pacing. If you own a PS5 Pro, that is the best way to experience Endless Ragnarok on console. If you own a base PS5, the Performance mode is the sweet spot for smooth combat.
The Steam Deck version is Playable, with a stable 30 fps target and some drops in cities. The UI is well-suited to the handheld screen. If you own a Steam Deck and enjoy action RPGs, this is a functional portable experience. There is no macOS version, and Xbox owners cannot play this game. The game supports full crossplay, so you can play with friends regardless of platform, but cross-save is limited to the same platform family.
Specs may be revised by Cygames in future patches or updates. This article reflects the Steam store page, PlayStation Store listing, Fanatical, PSPrices, PS5 Pro performance data, GameWatcher’s Switch 2 analysis, Eurogamer Germany, Nintendo Online, Steam Deck HQ, RPGFan, NextGame.es, and verified outlet reports as of 18 September 2026. Chen Xi verifies all specifications by checking official store pages and dating each table; no numbers in this article are estimated or inferred.