The Blood of Dawnwalker System Requirements: PC Specs, PS5 & Xbox Series X|S Performance Guide
The Blood of Dawnwalker is an open-world dark fantasy action RPG from Rebel Wolves, a studio founded by former The Witcher 3 director Konrad Tomaszkiewicz. It runs on Unreal Engine 5 and launches on 3 September 2026 for PC, PS5, and Xbox Series X|S. Performance-wise, this is a genuinely demanding AAA title, though not in the way you might expect. The headline numbers are reasonable, but there is one critical caveat that applies to every single configuration: an upscaler (DLSS, FSR, or XeSS) running on its Balanced preset is assumed to be enabled at all times . Without upscaling, these requirements are not directly comparable to a native-resolution experience. All PC specifications below are taken from the official The Blood of Dawnwalker Steam page and cross-checked against the GOG store listing, KitGuru’s breakdown, and G2A News’ spec report.
System Requirements
Minimum (Windows, 1080p at 30 FPS, Low Preset)
| Component | Requirement |
|---|---|
| OS | Windows 10 (64-bit), DirectX 12 |
| Processor | Intel Core i5-11400F or AMD Ryzen 7 2700X |
| Memory (RAM) | 16 GB |
| Graphics | NVIDIA GeForce GTX 1060 or AMD Radeon RX 580 |
| VRAM | 6 GB or more |
| DirectX | Version 12 |
| Storage | 60 GB available space on SSD |
| Additional Notes | Upscaler (DLSS/FSR/XeSS) on Balanced preset assumed; SSD required |
Source: The Blood of Dawnwalker Steam page, GOG listing, and KitGuru. Last verified: 11 September 2026.
What this means in practice: This minimum tier targets 1080p at 30 fps on Low settings, and the GTX 1060 is a 2016 card. That sounds accessible, but the 6 GB VRAM requirement is the detail that matters most. The 3 GB variant of the GTX 1060 will not meet this bar, and neither will a 4 GB RX 570. You need the 6 GB model specifically. The 16 GB system RAM requirement is also non-negotiable, appearing across every single configuration tier . The 60 GB SSD requirement is unusually strict for a minimum spec, and the developer makes no mention of HDD being supported. If you are still running a mechanical drive, you will need to move this game to an SSD before playing.
Recommended (Windows, 1080p at 60 FPS, Medium Preset)
| Component | Requirement |
|---|---|
| OS | Windows 10 (64-bit), DirectX 12 |
| Processor | Intel Core i7-11700K or AMD Ryzen 7 5700X |
| Memory (RAM) | 16 GB |
| Graphics | NVIDIA GeForce RTX 2060 Super / GTX 1070 Ti, AMD Radeon RX 5700, or Intel Arc A750 |
| VRAM | 8 GB or more |
| DirectX | Version 12 |
| Storage | 60 GB available space on SSD |
| Additional Notes | Upscaler on Balanced preset assumed; SSD required |
Source: The Blood of Dawnwalker Steam page, GOG listing, and G2A News. Last verified: 11 September 2026.
What this means in practice: The recommended tier targets 1080p at 60 fps on Medium settings. The RTX 2060 Super and RX 5700 are 2019-era mid-range cards, and the i7-11700K is a 2021 processor. This is a reasonable mid-range target for a modern UE5 open-world game. The jump from 6 GB to 8 GB of VRAM is the most important change between tiers, and it reflects the game’s heavy use of UE5’s Nanite and Lumen systems, which are VRAM-hungry by design. If you are running a 6 GB card, you will be capped at the minimum tier regardless of your GPU’s raw power.
High (1440p at 60 FPS, High Preset)
| Component | Requirement |
|---|---|
| OS | Windows 10 (64-bit), DirectX 12 |
| Processor | Intel Core i7-11700K or AMD Ryzen 7 5700X |
| Memory (RAM) | 16 GB |
| Graphics | NVIDIA GeForce RTX 4060, AMD Radeon RX 7600 XT, or Intel Arc B580 |
| VRAM | 8 GB or more |
| DirectX | Version 12 |
| Storage | 60 GB available space on SSD |
| Additional Notes | Upscaler on Balanced preset assumed; SSD required |
Source: KitGuru and G2A News. Last verified: 11 September 2026.
What this means in practice: This tier targets 1440p at 60 fps on High settings, and the RTX 4060 is a 2023 card. The processor requirement is identical to the 1080p 60 fps tier, which tells you the game’s CPU load plateaus at a certain point and does not scale with resolution. The 8 GB VRAM requirement remains unchanged from the recommended tier, which suggests 1440p does not push VRAM usage significantly higher than 1080p when an upscaler is active. If you own a mid-range GPU from the last two years, this is your target tier.
Ultra (4K at 60 FPS, Ultra Preset)
| Component | Requirement |
|---|---|
| OS | Windows 10 (64-bit), DirectX 12 |
| Processor | Intel Core i7-12700K or AMD Ryzen 7 7800X3D |
| Memory (RAM) | 16 GB |
| Graphics | NVIDIA GeForce RTX 4070 Ti or AMD Radeon RX 9070 |
| VRAM | 12 GB or more |
| DirectX | Version 12 |
| Storage | 60 GB available space on SSD |
| Additional Notes | Upscaler on Balanced preset assumed; SSD required |
Source: KitGuru and G2A News. Last verified: 11 September 2026.
What this means in practice: The Ultra tier targets 2160p (4K) at 60 fps on Ultra settings, and the RTX 4070 Ti is a 2023 upper-mid-range card. Notably, this configuration was originally listed with an RTX 5090 before Rebel Wolves revised the specifications downward, which is a rare and welcome move in the opposite direction of most modern spec sheets . The 12 GB VRAM requirement reflects the demands of 4K rendering even with an upscaler active. The Ryzen 7 7800X3D and Core i7-12700K are both high-end gaming processors, which confirms that the game’s simulation systems (NPC schedules, world state, time progression) place a real load on the CPU at higher frame rates.
PlayStation 5
| Component | Requirement |
|---|---|
| Firmware | Latest PS5 system software |
| Storage | 50.505 GB (digital download) |
| Performance Modes | Quality: Dynamic 4K at 30 fps; Balanced: Dynamic 4K at 40 fps; Performance: 60 fps (day-one patch) |
| Additional Notes | PS5 Pro enhanced; no Performance Mode at launch without day-one patch |
Source: Eurogamer’s console mode report, Gfinity Esports’ Performance Mode confirmation, and Game8’s file size data. Last verified: 11 September 2026.
What this means in practice: The PS5 version launched without a 60 fps mode. Eurogamer’s report confirmed that the game shipped with two modes: Quality at 30 fps and Balanced at 40 fps, both with dynamic 4K resolution . This caused significant backlash from players, and Rebel Wolves responded by confirming a day-one launch patch adding a 60 fps Performance Mode for PS5, PS5 Pro, and Xbox Series X . The 50.505 GB download size is smaller than the PC version’s 60 GB requirement, which is typical for console builds that do not need to accommodate multiple graphics preset configurations . If you own a PS5, you will want to install the day-one patch before playing.
Xbox Series X|S
| Component | Requirement |
|---|---|
| Firmware | Latest Xbox system software |
| Storage | 50.65 GB (digital download) |
| Performance Modes (Series X) | Quality: Dynamic 4K at 30 fps; Balanced: Dynamic 4K at 40 fps; Performance: 60 fps (day-one patch) |
| Performance Modes (Series S) | No Performance Mode; targets 30 fps |
| Additional Notes | Xbox Play Anywhere support |
Source: Eurogamer’s console mode report, Gfinity Esports’ Performance Mode confirmation, and Shacknews’ Series S clarification. Last verified: 11 September 2026.
What this means in practice: The Xbox Series X receives the same three modes as the PS5: Quality at 30 fps, Balanced at 40 fps, and Performance at 60 fps following the day-one patch. The Xbox Series S is the exception: Shacknews confirmed that the Series S version will not receive a Performance Mode and will target 30 fps . If you own a Series S, you should set your expectations accordingly. The 50.65 GB download size is nearly identical to the PS5 version. Xbox Play Anywhere support means that purchasing the digital version grants access on both console and Windows PC, which is a genuine value point if you game across both platforms.
Steam Deck: Officially Unsupported
The Blood of Dawnwalker is marked as Unsupported on Steam Deck. Independent testing from RPG Site’s performance analysis found that the game cannot maintain 30 fps on Steam Deck and regularly drops below 20 fps in open areas . This is not surprising given the game’s 16 GB RAM requirement and the Steam Deck’s 4-core CPU, which falls short of the minimum spec’s 6-core Ryzen 7 2700X. If you want to play on a handheld, streaming from a PC or console is the only viable option.
macOS and Linux: Not Available
The Blood of Dawnwalker is a Windows-only release on PC. There is no macOS or native Linux version available, and Rebel Wolves has not announced plans for either. Linux users can play through Proton on desktop hardware, but Steam Deck performance makes handheld play inadvisable.
Final Verdict: Can Your Setup Run The Blood of Dawnwalker?
The Blood of Dawnwalker is a genuinely demanding game, but the demands are concentrated in specific areas. The 16 GB RAM requirement is universal across every tier, and the 60 GB SSD requirement is equally non-negotiable. If you are still running a mechanical hard drive or 8 GB of RAM, you will need to upgrade before playing, regardless of your GPU.
The 6 GB VRAM minimum is the other critical threshold. If you own a 3 GB or 4 GB graphics card, you cannot run this game, period. You need at least a 6 GB card for the minimum tier and 8 GB for anything above 1080p 30 fps.
The most important thing to understand is the upscaler assumption. Every configuration on the official spec sheet assumes DLSS, FSR, or XeSS is enabled on the Balanced preset . Without upscaling, you will need significantly more GPU horsepower to hit the same frame rates. If you have a mid-range PC from the last three to four years with a 6 GB or 8 GB GPU and 16 GB of RAM, you can run this game, but you will be relying on upscaling to do so.
On console, the situation is more straightforward. The PS5 and Xbox Series X both received a day-one 60 fps Performance Mode, and the game runs smoothly on both platforms, though IGN’s technical editor noted that console versions have “noticeably reduced detail and vegetation density” compared to PC . The Xbox Series S is capped at 30 fps with no Performance Mode. If you own a capable gaming PC, that remains the best way to experience The Blood of Dawnwalker.
Specs may be revised by the developer in future patches or updates, and console performance may improve with further optimisation. This article reflects the Steam store page, GOG listing, PlayStation Store, Xbox Store, and verified outlet reports as of 11 September 2026. Chen Xi verifies all specifications by checking official store pages and dating each table; no numbers in this article are estimated or inferred.