No More Room in Hell 2 System Requirements: PC Specs, PS5, Xbox Series X|S & Steam Deck Performance Guide
No More Room in Hell 2 is an eight-player cooperative survival horror shooter from Torn Banner Studios, the developer behind Chivalry 2, published by Green Man Gaming. It launched out of Early Access on 11 August 2026 for PC, PS5, and Xbox Series X|S, with full cross-play across all platforms. Performance-wise, this is a mid-weight Unreal Engine 5 title: the PC minimum asks for a GTX 1650 with 4 GB of VRAM and 12 GB of RAM, but the game launched with a number of known optimisation issues that Torn Banner is still addressing. The Windows specifications below are taken directly from the game’s official Steam store page and cross-checked against the Epic Games Store listing and PCGameBenchmark.
System Requirements
Minimum (Windows)
| Component | Requirement |
|---|---|
| OS | Windows 10 (64-bit) |
| Processor | Intel Core i5-6600 or AMD Ryzen 3 1200 |
| Memory (RAM) | 12 GB |
| Graphics | NVIDIA GeForce GTX 1650 (4 GB), AMD Radeon RX 570 (4 GB), or Intel Arc A580 |
| VRAM | 4 GB |
| DirectX | Version 12 |
| Storage | 35 GB available space |
| Network | Broadband internet connection required |
| Additional Notes | Targets 1080p at 30 fps on Low settings with Performance Super Sampling. No SSD requirement stated. |
Source: Steam store page for No More Room in Hell 2 and Epic Games Store listing. Last verified: 14 September 2026.
What this means in practice: The minimum tier targets 1080p at 30 fps on Low settings, and Torn Banner has been unusually transparent about the fact that this assumes Performance Super Sampling is enabled. The GTX 1650 is a 2019 entry-level card with just 4 GB of VRAM, which is the absolute floor here. If you own a 2 GB or 3 GB card from the same era, you will not meet this spec. The 12 GB system RAM requirement is slightly higher than the 8 GB floor many games list, and it reflects the game’s eight-player co-op sessions where multiple character models, persistent world states, and proximity voice chat data are all held in memory simultaneously. The 35 GB install size is moderate. If you have a gaming PC built in the last six to seven years with a 4 GB GPU and 12 GB of RAM, you will clear this bar, though you should expect to run the game at Low settings to hit a stable 30 fps.
Recommended (Windows)
| Component | Requirement |
|---|---|
| OS | Windows 10 (64-bit) |
| Processor | Intel Core i7-10700K or AMD Ryzen 5 5500GT |
| Memory (RAM) | 16 GB |
| Graphics | NVIDIA GeForce RTX 2070 (8 GB) or AMD Radeon RX 5700 XT (8 GB) |
| VRAM | 8 GB |
| DirectX | Version 12 |
| Storage | 35 GB available space |
| Network | Broadband internet connection required |
| Additional Notes | Targets 1080p at 60 fps on High settings with Quality Super Sampling. No SSD requirement stated. |
Source: Steam store page for No More Room in Hell 2 and Epic Games Store listing. Last verified: 14 September 2026.
What this means in practice: The recommended tier targets 1080p at 60 fps on High settings with Quality Super Sampling, and the jump from 4 GB to 8 GB of VRAM is the most important change between tiers. The RTX 2070 is a 2018 upper-mid-range card, and the i7-10700K is a 2020 processor. This is a reasonable mid-range target for an Unreal Engine 5 title with eight-player co-op. If you have a gaming PC from the last four to five years with an 8 GB GPU and 16 GB of RAM, you will meet this tier comfortably. The 35 GB install size remains unchanged, and there is still no SSD requirement stated.
PC Performance Notes at Launch
The PC version launched with several known technical issues that Torn Banner has documented on the official No More Room in Hell 2 website. Players with NVIDIA graphics cards reported hitching, which the developer says is resolved by updating graphics card drivers. A more significant issue involves memory problems when Responders are heavily customised, particularly in squads using DLC outfits with logos and patterns. Torn Banner’s official recommendation until a fix is released is to avoid selecting clothing with logos and patterns. The developer has scheduled hotfixes for crash fixes, server stability improvements, and memory usage reductions, with the second hotfix specifically targeting “lower end machines and the Xbox Series S.” If you are buying the PC version now, check the official site for the latest patch status before playing.
PlayStation 5
| Component | Requirement |
|---|---|
| Firmware | Latest PS5 system software |
| Storage | 14.41 GB (digital download) |
| Performance | Targets 60 fps; specific resolution targets not published by Torn Banner |
| Additional Notes | Cross-play with PC and Xbox supported; missing textures issue reported at launch and addressed in hotfix |
Source: PSPrices download size data, GameSurf’s console launch coverage, and the official No More Room in Hell 2 website. Last verified: 14 September 2026.
What this means in practice: The PS5 version has a 14.41 GB download size, which is notably smaller than the PC version’s 35 GB requirement. This is a significant difference and suggests the console build uses more aggressive asset compression or excludes some high-resolution PC-specific assets. Torn Banner has not published specific resolution targets for the PS5, but the Xbox versions target 60 fps and the hardware is comparable, so PS5 players should expect a similar performance profile. A missing textures issue on PS5 was reported at launch and Torn Banner confirmed it is being addressed in the first hotfix. The game supports full cross-play with PC and Xbox, so you can team up with friends regardless of platform.
Xbox Series X|S
| Component | Requirement |
|---|---|
| Firmware | Latest Xbox system software |
| Storage | Not specified on the Xbox Store listing |
| Performance | Targets 60 fps on both Series X and Series S, with occasional dips into the lower 50s during heavy horde encounters |
| Additional Notes | Cross-play supported; Xbox Series S specifically mentioned in hotfix plans for memory usage improvements |
Source: InGameNews’ Xbox launch report, GameSurf’s console launch coverage, and the official No More Room in Hell 2 website. Last verified: 14 September 2026.
What this means in practice: The Xbox versions target 60 fps on both Series X and Series S, which is a strong result for an Unreal Engine 5 title with eight-player co-op. Early testing footage indicates occasional dips into the lower 50s during heavy horde encounters, which is a minor caveat for a game where frame rate consistency matters during frantic combat. The fact that both consoles target the same frame rate is notable; the Series S typically runs at lower resolutions, but Torn Banner has prioritised frame rate parity across the Xbox family. The Series S is specifically mentioned in Torn Banner’s hotfix plans for memory usage improvements, which suggests the console’s 10 GB RAM has been a bottleneck during development. If you own a Series S, you may see performance improvements in future patches.
Steam Deck
| Component | Requirement |
|---|---|
| Compatibility | Playable (rated by Valve); Verified for Steam Machine |
| Performance | 50 to 60 fps in open areas at lowest settings with FSR 3.1 Ultra Performance; drops to 23 fps in dense areas with many zombies |
| Additional Notes | Controller configuration requires customisation for flashlight, crouch, and map functions; no native controller support at Early Access launch |
Source: Steam Deck HQ’s performance testing and the official No More Room in Hell 2 website. Last verified: 14 September 2026.
What this means in practice: No More Room in Hell 2 carries a Playable rating on Steam Deck, and Torn Banner has confirmed it is Verified for Steam Machine. Steam Deck HQ’s testing found that the game can hit 50 to 60 fps in cave and outskirts areas at the lowest possible settings with FSR 3.1 set to Ultra Performance, but frame rates drop as low as 23 fps in dense areas with many zombies and detailed props. The reviewer expects performance to “tank” in the most crowded sections of the map. The game launched without native controller support, and Steam Deck users need to customise their controller configuration to access the flashlight, crouch, and map functions. Torn Banner has not prioritised Steam Deck optimisation, but the developer has not blocked Linux users with anti-cheat, which means the game is at least accessible on the platform. If you own a Steam Deck, this is a playable but compromised experience, and you should expect to spend time in the settings menu before your first match.
macOS and Linux: Not Available
No More Room in Hell 2 is a Windows-only release on PC. There is no macOS or native Linux version available. Steam Deck users play through Proton, and the Playable rating confirms this compatibility layer works, though with the performance caveats noted above.
Final Verdict: Can Your Setup Run No More Room in Hell 2?
No More Room in Hell 2 is a reasonably accessible PC game, but the launch state complicates the picture. The minimum spec asks for a GTX 1650 with 4 GB of VRAM and 12 GB of RAM, which is hardware from 2019. The recommended spec asks for an RTX 2070 with 8 GB of VRAM and 16 GB of RAM, which is achievable on most mid-range gaming PCs from the last four to five years. The VRAM jump from 4 GB to 8 GB is the most important threshold: if you have a 4 GB card, you are capped at the minimum tier regardless of your GPU’s raw power.
The bigger consideration is the launch state of the PC version. Torn Banner has documented hitching issues with NVIDIA cards, memory problems with customised characters, and a list of known crashes and bugs that are being addressed in scheduled hotfixes. The developer has been transparent about these issues and is actively patching the game, but if you are buying on PC today, you should check the official site for the latest patch status and be prepared to update your graphics drivers. The customisation memory issue is particularly relevant because it affects players who use DLC outfits with logos and patterns, which is a core part of the game’s cosmetic system.
On console, the situation is simpler. The PS5 and Xbox Series X|S versions both target 60 fps, and the PS5 download size of 14.41 GB is less than half the PC version’s 35 GB. The Xbox Series S also targets 60 fps, which is a strong result for the hardware, though it is specifically mentioned in Torn Banner’s memory improvement plans. Cross-play is supported across all platforms, so you can play with friends regardless of where they own the game.
If you own a Steam Deck, the game is Playable but not ideal. Performance drops significantly in dense areas, and the lack of native controller support means you will need to configure your controls manually. If you have a gaming PC with an 8 GB GPU and 16 GB of RAM, that is the best way to experience No More Room in Hell 2. If you prefer console, the PS5 and Xbox Series X versions are both solid choices.
Specs and performance details may be revised by Torn Banner Studios in future patches, and the developer has already scheduled multiple hotfixes addressing crashes, memory usage, and server stability. This article reflects the Steam store page, Epic Games Store listing, PCGameBenchmark, the official No More Room in Hell 2 website, Steam Deck HQ, GameSurf, InGameNews, and PSPrices as of 14 September 2026. Chen Xi verifies all specifications by checking official store pages and dating each table; no numbers in this article are estimated or inferred.